WA Warm Air Heater

WA 150 Warm Air Heater

WA 150 warm air heater — 150 kW for industrial wood-waste heating and disposal.

Nominal output: 150 kW
joinery
panel processing
wood waste disposal

Gallery

Click any image to enlarge.

High-angle 3D render of a Ranheat WA 150 150kW warm air heater with a 3m 1-ring C14 conical silo and dust extraction cyclone — Elevated render of a fully automatic WA 150 installation with a 3m 1-ring C14 conical silo, dust extraction cyclone and auger fuel feed.

The bag loader fuel-handling system on a Ranheat WA 150 warm air heater that has been in service for around 17 years — Bag loader fuel-handling system on a Ranheat WA 150 warm air heater - a customer installation still running after about 17 years.

Ranheat WA 150 warm air heater fan housing, cyclone separator and control panel during a 17-year service site visit — A site visit to a 17-year-old Ranheat WA 150 warm air heater, showing the fan housing, cyclone and Ranheat control panel with overhead warm air ducting.

Front view of a 17-year-old Ranheat WA 150 wood waste warm air heater showing the black cast fuel and ash doors and blue heater body — A Ranheat WA 150 warm air heater photographed after roughly 17 years in service, showing the front cast doors, ash door and twin-skin blue/black heater body still in working condition.

Wide view of a 17-year-old Ranheat WA 150 wood waste warm air heater installed in a working timber workshop — A Ranheat WA 150 warm air heater set within a busy timber workshop, still in service after roughly 17 years.

CAD general arrangement render of a Ranheat WA 150 150kW warm air heater with hogger loader fuel handling system — General arrangement layout drawing for the A&J Sectional Building installation: a Ranheat WA 150 warm air heater fed by a hogger loader fuel-handling system, mounted on a common base plinth with flue stack.

Low-angle 3D render of a Ranheat WA 150 150kW warm air heater with a 3m 1-ring C14 conical silo and cyclone — Low-angle render of a fully automatic WA 150 installation with a 3m 1-ring C14 conical silo, cyclone and auger fuel feed.

3D perspective render of a Ranheat WA 150 150kW warm air heater with a B10 10m3 bunker silo, cyclone and control panel — Perspective render of a WA 150 warm air heating system fed from a B10 10m3 flat-bottomed bunker silo, with cyclone, control panel and auger fuel feed.

Ranheat WA 150 warm air heater at Kustom Designs with a B10 bunker silo direct-fed from a roof-level dust extraction system — Site photograph of the Kustom Designs installation: a Ranheat WA 150 warm air heater fed by a B10 bunker silo. The elevated dust extraction system discharges wood waste straight down into the B10, which acts as a replacement skip - no separate fuel transfer system is needed.

3D perspective render of a Ranheat WA 150 150kW industrial biomass warm air heater with bag loader fuel feed — 3D perspective render of the Ranheat WA 150 150 kW industrial biomass warm air heater in its bag loader layout, showing the heater, recirculation fan, flue chimney and blue bag loader fuel feed.

Cropped close-up 3D render of a Ranheat WA 150 warm air heater with a BB-2 baby bunker and transfer screw — Cropped, tighter-framed render of the WA 150 warm air heater with its BB-2 baby bunker and transfer screw fuel feed.

3D render of a Ranheat WA 150 warm air heater fed by a BB-2 baby bunker silo via a transfer screw inside an energy centre — Energy-centre layout render of a WA 150 warm air heater with a BB-2 2m3 baby bunker and a transfer screw delivering fuel to the burner.

Wide site view of a Ranheat WA 150 warm air heater installation with galvanised B10 bunker silo, elevated dust extraction filters and chimney — Wide site photograph of a complete WA 150 installation on an overcast day, showing the warm air heater, galvanised B10 bunker silo, raised dust extraction filter bank and flue chimney alongside an industrial unit.

Ranheat WA 150 biomass boiler working layout for Kustom Design with conical fuel silo and cyclone — Working layout render for the Kustom Design project, showing the WA 150 boiler installed against a wall with a conical fuel silo and cyclone dust extraction.

Rear-view 3D render of a Ranheat WA 150 150kW warm air heater with a blue-roofed B10 bunker silo, centrifugal fan and walking-floor discharge — Rear render of an automatic WA 150 warm air heating system feeding from a blue-roofed B10 bunker silo with walking-floor discharge.

Rear-view 3D render of a Ranheat WA 150 warm air heater at Kustom Designs, with a ceramic filter mounted above a B10 bunker silo and large flue ducting — Rear-side render of the Kustom Designs WA 150 warm air heating system, showing the ceramic filter mounted high above a B10 bunker silo, with bold flue and recirculation ducting linking the heater, filter and silo.

Rear view of an installed Ranheat WA 150 black warm air heater beside a galvanised B10 bunker silo with diamond-plate cladding — Site photograph taken at the rear of a WA 150 installation, showing the black warm air heater unit with diamond-plate cladding and integral cyclone alongside the galvanised B10 bunker silo and chimney.

Perspective layout render of a Ranheat WA 150 warm air heater with cyclone and conical silo in the Inoscape plant room — Perspective layout render of the Inoscape installation from a high angle, showing the WA 150 heater, cyclone, conical silo and overhead ducting.

Perspective layout render of a Ranheat WA 150 warm air heater, cyclone and conical silo inside the Inoscape plant room — Perspective layout render of the Inoscape installation, showing the WA 150 heater, cyclone, C25 conical silo and ducting positioned inside the customer plant room.

Ranheat WA 150 150kW warm air wood waste heater with 4m conical fuel silo on a concrete base, perspective render — Perspective render of the Inoscape WA 150 installation: a 150 kW warm air heater fed from a 4m diameter conical fuel silo, with auger discharge, transfer screw and flue.

Side elevation layout render of a Ranheat WA 150 warm air heater, cyclone and conical silo in the Inoscape plant room — Side-elevation layout render of the Inoscape installation, showing the WA 150 heater, cyclone, C25 conical silo and ducting against the plant room wall.

Side elevation render of a Ranheat WA 150 warm air heater alongside a 4m conical fuel silo with flue stack — Straight side-elevation render of the Inoscape WA 150 installation, showing the heater, transfer screw, C25 conical silo and flue at true proportions.

Cutaway render of a Ranheat WA 150 warm air heater and C25 conical silo showing internal fuel feed and combustion — Cutaway render of the complete Inoscape installation, sectioning both the WA 150 heater and the C25 conical silo to show the full fuel-to-heat path.

Close-up render of a Ranheat WA 150 warm air heater with silo cone discharge, transfer screw and fan — Close-up render of the WA 150 fuel-handling end of the Inoscape installation, showing the silo cone discharge, rotary valves, transfer screw and the heater fan.

Summary

WA 150 warm air heater — 150 kW for industrial wood-waste heating and disposal.

Overview

Elevated render of a fully automatic WA 150 installation with a 3m 1-ring C14 conical silo, dust extraction cyclone and auger fuel feed.

Best For

Joinery and panel-processing workshops
Industrial wood-waste disposal with heat recovery

Fuel And Combustion Notes

Compatible with wood, mdf, chipboard, shavings, offcuts. [TBD: combustion/grate detail]

Related Products